In Stock


This product cannot be sold or shipped to the state of California.

Nitrous Outlet Mustang 5.0L Plate Specific System
Take your 2015-2021 Mustang GT into the 10’s and quicker, with LMR and Nitrous Outlet! The new 2015-2021 Mustang is a player in stock form, a potent performer with a few bolt-ons, and untouchable on the spray. This kit utilizes a Mustang-specific solenoid bracket & pre-bent stainless hard lines to connect the solenoids to the plate. This is THE Nitrous Kit you want for your new 2015-2021 Mustang!

Coyote Specific Nitrous Plate
The star of the show. The .75″ thick CNC machined billet aluminum masterpiece is black anodized for great looks & corrosion resistance. The internal fuel and nitrous passages, as well as the discharge passages, are precision drilled for precise flow and atomization. The design is based on over a year of R&D spanning 3 different designs before finding the perfect solution. It is sealed to the intake using factory O-ring gaskets & will support a 400+ horsepower shot. This is the only 2015-2021 Mustang Nitrous Plate you need to look at.

Nitrous & Fuel Solenoids
A CNC machined stainless steel body is the basis of the solenoids used in this 2015-2021 Mustang Nitrous System. The heavy-duty coils are encapsulated in Epoxy to resist the elements & vibration while the solenoid leads wires are 14 gauge stranded wire with color-coded insulation. The nitrous solenoid features a .125 orifice, a 1/4″ NPT inlet, a 1/8″ NPT Purge Port for that nifty nitrous purge kit, and a 1/8″ NPT bottom outlet. The Fuel Solenoid features a .187 orifice and a 1/8″ NPT inlet & outlet. Both solenoids will support a 400 horse shot. They feature a Lifetime Warranty.

10Lb Nitrous Bottle
The included nitrous bottle is of the 10Lb variety & is covered in a gloss black powder coat. The black anodized high flow billet bottle valve finishes off the look. The bottle valve also features two 1/8″ NPT ports in the side that allow easy additions of nitrous pressure gauges, nitrogen assisted pressure systems, or nitrous pressure sensors. The nitrous bottle is held in place with dual stainless steel band type bottle brackets.

Nitrous Jets
Nitrous jets and fuel jets are CNC Machined from brass with a precision ground orifice for the utmost accuracy. 4 sets of jets are included in the nitrous kit that allows for increases of 50, 100, 150, & 200 horsepower.

Fuel Line Adapter
The billet aluminum fuel rail adapter makes tapping into your fuel system a snap for adequate fuel supply for your new 2015-2021 Mustang nitrous system. It is CNC machined for a perfect fit and black anodized for long-lasting good looks. It goes between the fuel supply hose and the fuel rail & includes an extra 1/8″ NPT port for use with a pressure gauge (gauge not included).

Custom Solenoid Bracket and Pre-Bent Hardlines
Solenoids are mounted to a custom black anodized solenoid bracket that holds the solenoid assembly to the throttle body. The bracket provides a sturdy foundation to install the pre-bent stainless steel hard lines. The stainless steel lines are hand bent to connect the solenoids to the plate fittings.

Additional Parts Included
This 2015-2021 Mustang Nitrous Kit Wet Plate System also includes all the braided lines, fittings, brackets, switches, relays, connectors, and hardware you’ll need for a basic installation. The kit is adjustable from 50-200 horsepower, but what if 200 horses not enough for you? Not a problem! You can upgrade the stainless braided feed line, bottle nipple, and solenoids fittings to support over 400 HP! This Mustang nitrous system solenoids can support up to a 400 horsepower shot if your fuel system & engine are up to the task. Additional jetting is required for shots over 200 HP. (Please remember that having a properly built engine & adequate fuel system along with a solid computer tune are all absolute necessities with nitrous.)

Technical Notes

  • When installing nitrous on any car, we strongly recommend that you change to a colder set of spark plugs. Also, tune your timing and air-fuel ratio accordingly.
  • The included jetting is for gasoline use. If you are running E85 you will need to purchase additional jetting.
  • The window switch is strongly recommended for installation.
  • This Nitrous Kit includes a WOT microswitch for activating the kit at WOT. For digital TPS activation, We recommend NO-0061001Fitment Note
  • Will not fit Bullitt or GT350 manifold or Mustang.Application
  • Fits 2015-2021 Ford Mustang 5.0 with Stock or Boss 302 Manifold
    This product is intended for off-road use only, and is not legal for use in emission restrictive states. Off-Road Disclaimer

    With the addition of a nitrous, turbo, or supercharger kit; custom tuning will be required for your car to run properly and safe.

    Fitment Note

  • Due to the spacer between the intake manifold and throttle body, modifications to the intake tube and/or other components may be required for proper clearances.


There are no reviews yet.


Your email address will not be published. Required fields are marked *

one × 4 =